Operation > 41
Image tab
1. Dithering produces an intermediate greyscale by adjusting the combination of dots
used in printing. Selecting a setting determines the degree of detail with which a
graphics image will be printed. Mesh determines that a screen of dots is used for
dithering while Line Art determines that an array of lines is used for dithering.
2. Select dithering texture by setting the size of dots used in the halftone screen.
3. Set this control to print greyscale effects in black without dithering. Select the
check-box to disable greyscale printing or de-select the check-box to enable
greyscale printing.
4. You can manually adjust lightness (the higher the setting the lighter the print) and
contrast (the higher the setting the greater the contrast).
5. A single on-screen button restores the default settings.
1
2
3
4
5
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
