Operation > 42
PS
EMULATION
(B430
DN
)
The tabs available are the Layout Tab, the Paper/Quality Tab and the Job Options Tab.
Layout tab
1. Page orientation can be set to portrait (tall), landscape (wide) or landscape rotated
by 180 degrees.
2. Print on both sides (duplex printing) can be set to long edge or short edge of the
document.
3. Printed page order can be set as front to back or back to front of the document.
4. Set the number of pages to be printed on a single sheet. You can also set it to print
a booklet.
5. Click the Advanced button to be able to set further document options as follows:
1. Select the required printed paper size.
2. You can substitute another font for TrueType Font.
3. You can set other document options as required, including PostScript options and
printer features.
To Next Page
Loading...
Need help?
General
