Oki B2200 - Page 100

Oki Data CONFIDENTIAL
43641601TH Rev.1
100 / 100
Value Description
Web Browser NIC Setup Tool
SNMP Setting
-
SNMP v 1 Sets the version of the SNMP used.
DISABLE
SNMP Read
Community Setting -
public Sets the Read Community used in the SNMP
v 1. Up to 15 alphanumeric characters can be
entered.
SNMP Write
Community Setting -
public Sets the Write Community used in the SNMP
v 1. Up to 15 alphanumeric characters can be
entered.
HUB Link Setting
-
AUTO
NEGOTIATION
Sets HUB link setting (transmission method
and rate). It should normally be set to AUTO
NEGOTIATION.
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
Web
(Port No: 80)
Printer Setup (Web) ENABLE Sets whether to enable/disable access
through a Web browser in the printer.
DISABLE
Web
-
1 Sets a port number to gain access to the Web
page for the printer.
Note that the following port numbers cannot
be set because the unit already uses them.
Port numbers: 23, 515, 9100, 161, 9966
80
65535
SNMP
-
ENABLE Sets whether to enable/disable access
through SNMP in the printer.
Select ENABLE for normal use.
DISABLE
Local Ports
-
ENABLE Sets whether to enable/disable a unique
protocol.
DISABLE
Password Setting Password Change Last 6 digits of
Ethernet address
Changes the administrator’s password. Up to
15 alphanumeric characters can be entered.
Case sensitivity is on. If the password is
forgotten, it cannot be changed.