Oki B2200 - Page 99

Oki Data CONFIDENTIAL
43641601TH Rev.1
99 /
c) HTTP
The HTTP is an application to reference and change the menu of the Network/Printer.
The HTTP of this system supports simultaneous connection of multiple clients for personal
users. Furthermore, it provides multiple connections for one client.
d) SNMP
The SNMP is an application to reference and change the menu of the Network/Printer.
The SNMP of this system supports simultaneous connection of multiple clients for personal
users. Furthermore, it provides multiple connections for one client.
(
8) Setup
Each setup item can be set by the network management tool.
Item Factory Default Setup Range Description
HTTP version 1.0 1.0 Indicates the version of the HTTP
being implemented.
Value Description
Web Browser NIC Setup Tool
IP Address Setting IP Address Acquisition
Method
Auto Sets whether to acquire an IP address or not
in the DHCP/BOOTP server.
Manual
IP Address IP Address 192.168.100.100 or
169.254.xxx.xxx
Sets an IP address.If
the network cable is connected to the hub after
the initialization of the network, the IP address
will be 192.168.100.100.
If, even with “AUTO” IP address setting, a
server that automatically provides an IP
address, such as a DHCP server, does not
exist on the network, the IP address will be
169.254.xxx.xxx even when the network cable
is connected to the hub.
Host Name
-
“Product name” + “-
“ + “Last 6 digits of
Ethernet address”
Sets a value used for a DHCP server to
identify clients.
Subnet Mask Subnet Mask 255.255.255.0
or
255.255.0.0
Sets a subnet mask.
If the network cable is connected to the hub
after the initialization of the network, the IP
address will be 255.255.255.0.
If, even with “AUTO” IP address setting, a
server that automatically provides an IP
address, such as a DHCP server, does not
exist on the network, the IP address will be
255.255.0.0 even when the network cable is
connected to the hub.
Gateway Address Default Gateway
Address
0.0.0.0 Sets a gateway (default router) address. 0.0.0.0
means no router.
Printer Name
-
“OKI” + “-“ + “Product
name” + “-“ + “Last
6 digits of Ethernet
address”
Sets a name to identify the unit on the
network.
Administrator Contact
-
None Enters a system administrator’s contact. Up to
225 one-byte characters can be entered.
Printer Name
-
None Enters the name of the printer. Up to 31 one-
byte characters can be entered.
Installation Location
-
None Enters the installation location of the printer.
Up to 255 one-byte characters can be entered.
Printer Management
No. -
None Enters a value used for customer’s
management of the printer. Up to 8 one-byte
characters can be entered.