OPERATOR PANELS > 20
described in outline below. At all stages, detailed on-line help is provided
via the Help button.
1. Paper: set paper size for standard tray, secondary tray (if
installed), and manual feed, tray sequence and default number of
copies.
2. Layout: set paper cassette size, printer emulation, lines per page
and paper orientation.
3. Quality: set resolution (dpi), smoothing and darkness.
4. Economy: set power save delay, toner save, auto eject time,
manual timeout, low toner action and jam recovery.
5. Test Print: print demo page, printer menu setting list, a list of
available fonts, and clean the printer.
6. Memory: set raster buffer (normally set to auto) and confirm
buffer size.
7. Maintenance 1: configure printer serial and parallel interfaces,
clearable warning timing and reset drum counter and menu.
8. Maintenance 2: adjust print and page positions, settings,
language, power save setting enable/disable, and select to print an
error report, set tray ID.
9. About: about this printer.
To Next Page
Loading...
