To Next PageTo Next Page
Why does my Oki Printer print a graphic image across multiple pages?
If a graphic image prints partly on one page and partly on the next with your Oki Printer, it indicates insufficient printer memory for this image at this resolution. Try changing the resolution, reducing the image size, or installing more memory in your printer.
How to troubleshoot an INPUT JAM error on my Oki B4100 Printer?
To resolve a 'INPUT JAM' error on your Oki Printer, remove the paper tray, and take out any crumpled or folded paper. Also, check and remove any paper from the underside of the printer. Then, replace the paper tray. After removing the damaged paper, the printer should continue printing.
What to do if my Oki B4100 is ready but not printing?
If you try to print and nothing happens, but your Oki Printer indicates it is ready to receive data, there might be a configuration error. Check the cable connection to ensure it's properly connected. If more than one printer is available, make sure your printer has been selected as the default.
How to fix INPUT JAM on Oki Printer?
To resolve an INPUT JAM on your Oki Printer, start by removing the paper tray, then remove any crumpled or folded paper. Check and remove any paper from the underside of the printer. Replace the paper tray. After removing the damaged paper, the printer should continue printing.
Why does my Oki Printer need to warm up before printing?
If your Oki Printer is on but must warm up before a job is printed, it's likely that Power Save mode is enabled to conserve energy. The fuser needs to heat up before you can begin printing the next job. To eliminate the warm-up delay, change the Power Save setting.
Why is my Oki B4100 Printer printing garbled text?
If your Oki Printer is printing garbled output, it's likely that the incorrect driver is installed. Try installing an appropriate driver for your printer model.
Why is my Oki B4100 producing distorted prints?
If your Oki Printer is experiencing a distorted print, it could be due to a problem with the paper path, lamp assembly, or fusing unit. Try generating a cleaning page. If the problem persists, contact service.
What to do if my Oki Printer prints pages with a grey background?
If your Oki Printer is printing pages with a grey background, it's likely due to static electricity. This often happens in dry environments, causing toner to stick to the background. To fix this, try changing the paper to a smoother laser bond or use a humidifier to increase the humidity in the room.
Why is printed page light or blurred on my Oki B4100?
If the printed page from your Oki Printer is light or blurred, first, replace the toner cartridge. Then, ensure you are using paper recommended for laser printers. Finally, clean the LED array.
What to do if Oki B4100 does not print but indicates it is ready?
If you try to print and nothing happens, but the Oki Printer indicates it is ready to receive data, check the cable connection. If more than one printer is available, make sure your printer has been selected.
Performance| print speed | 19 pages per minute |
|---|---|
| CPU | 200 MHz |
| time to first page | 6.0 seconds |
| print resolution | 1200 x 600 dpi |
| duty cycle | 15, 000 pages per month |
Memory| standard RAM | 8 MB |
|---|---|
| maximum RAM | 8 MB |
Paper Handling| standard paper input | 250-sheet Letter/Legal/Universal tray |
|---|---|
| paper size minimum | 3.4" x 5.5" |
| paper size maximum | 8.5" x 14" |
Weight and Dimensions| size (WxDxH) | 14" x 15.6" x 7.9" |
|---|---|
| size (WxDxH in cm) | 35.5 cm x 39.5 cm x 20 cm |
| weight | 22 lb. (10.0 kg) |
