Oki B4100 User Manual

INTERFACES > 45
INTERFACES
Your printer is equipped with a selection of data interfaces:
1. Parallel – (not available on the B4100) For direct connection to a
PC. This port requires a bi-directional (IEEE 1384 compliant)
parallel cable.
2. USB – For connection to a PC running Windows 98 or above (not
Windows 95 upgraded to Windows 98) or Macintosh. This port
requires a cable conforming to USB version 1.1 or above.
The operation of a printer is not assured if a USB-compatible
device is connected concurrently with other USB-compatible
machines.
When connecting multiple printers of the same type, they appear
as *****, ***** (2), ***** (3), etc. These numbers depend on the
order of connecting or turning on each printer.
3. Serial – for direct connection to a device that uses serial printing
(available as an option only on the B4350, and B4350n). Note:
cannot be used with the Ethernet card.
4. Ethernet – For network cable connection; standard on the
B4350n. (available as an option on the B4350)
5. If you are connecting your printer directly to a standalone
computer proceed to the chapter entitled “Printer Drivers.”
If your printer is to be installed as a network printer, please refer to the
User’s Guide for the network interface card for further details on how to
configure the network connection before installing the printer drivers.
NOTE
Administrator’s authority is required when installing a network connection.

Oki B4100 Specifications

Performance

print speed	19 pages per minute
CPU	200 MHz
time to first page	6.0 seconds
print resolution	1200 x 600 dpi
duty cycle	15, 000 pages per month

Memory

standard RAM	8 MB
maximum RAM	8 MB

Paper Handling

standard paper input	250-sheet Letter/Legal/Universal tray
paper size minimum	3.4" x 5.5"
paper size maximum	8.5" x 14"

Weight and Dimensions

size (WxDxH)	14" x 15.6" x 7.9"
size (WxDxH in cm)	35.5 cm x 39.5 cm x 20 cm
weight	22 lb. (10.0 kg)