Oki B4400 Series User Manual

B4400/B4600 User’s Guide – Operator panels > 38
USB menu
This menu controls the operation of the printer’s USB data
interface.
Network menu
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
DATA BITS 8 BITS Only when RS232C is
installed
PARITY NONE Only when RS232C is
installed
MIN. BUSY 200mSEC Only when RS232C is
installed
OFF REC DISABLE Only when both RS232C
and PSE are installed
USB MENU
ITEM DEFAULT REMARKS
USB ENABLE
SOFT RESET DISABLE
OFF REC DISABLE Only when PSE is
installed
SERIAL NUMBER ENABLE
NETWORK MENU
ITEM DEFAULT REMARKS
TCP/IP ENABLE Only when NIC is installed
NETBEUI ENABLE Only when NIC is installed
NETWARE ENABLE Only when NIC is installed
ETHERTALK ENABLE Only when NIC is installed
FRAME TYPE AUTO Only when NIC is installed
IP ADDRESS SET AUTO Only when NIC is installed
IP ADDRESS Only when NIC is installed
SUBNET MASK Only when NIC is installed
GATEWAY ADDRESS Only when NIC is installed
INITIALIZE NIC? Only when NIC is installed
WEB/IPP ENABLE Only when NIC is installed
TELNET ENABLE Only when NIC is installed
FTP ENABLE Only when NIC is installed
RS232C MENU
ITEM DEFAULT REMARKS

Oki B4400 Series Specifications

General

Print Technology	LED
Type	Monochrome Printer
Paper Input Capacity	250 sheets
Duplex Printing	Manual
Connectivity	USB 2.0, Parallel
First Page Out Time	5 seconds
Media Types	Plain paper, envelopes, labels, card stock
Media Sizes	A4, A5, B5, Letter, Legal, Executive
Operating Systems Supported	Windows, Mac OS, Linux
Power Consumption	7W