B6250/B6500 User’s Guide> 27
5. Squeeze the length guide and slide
it to the desired paper size (1).
Squeeze the right width guide and
slide it to the desired paper size
(2).
6. Load the paper with the side to be
printed facing up and with all four
corners aligned.
7. Close the lid of the paper tray and push the tray completely
into the printer.
8. Depending on the types and sizes of the loaded paper, you
need to configure settings on the control panel. Change the
paper type when non-plain paper such as recycled paper,
heavyweight paper or transparencies are loaded. Configure
the paper size when custom size paper is loaded.
CAUTION!
Do not place paper over the right width guide.
Do not load paper exceeding the maximum fill line or the
maximum capacity allowed.
Align the right width guide with the paper width
correctly. If the right width guide is not in place, the
paper will not be properly fed and this may cause paper
jams.
The lid of the tray must be firmly closed. If not, the
paper might become misaligned.
To Next Page
Loading...
