B6250/B6500 User’s Guide> 30
C
HANGING
THE
D
ISPLAY
AND
R
EPORTING
L
ANGUAGE
The default language for display messages and printed reports is
English. You can change this to a different language as follows.
1. Press the MENU button on the control panel.
2. Press the <> button repeatedly to display the “System
Configuration Menu”.
3. Press the <> button to enter the “System Configuration
Menu”.
4. Press the < > button repeatedly to display the “Language”
sub-menu.
5. Press the <> button to display the current language.
6. Press the < > or < > button repeatedly until the language
you want is displayed.
7. Press the Select button to choose your preferred language,
then press the Cancel button to exit the menu system.
To Next Page
Loading...
