Oki B710dn User Manual

6 / English
Preparing a location for the
printer
Place the machine on a level and sturdy surface that
can withstand the machine weight, 50 lb. (22.6 kg). If
tilted, the machine may fall over and cause injuries.
Space requirements
The printer has ventilation holes on the side and rear
panels. Ensure that the printer is installed with a
minimum clearance of:
• Rear: 10 inches (255 mm)
• Left Side: 8 inches (200 mm)
• Right Side: 12 inches (300 mm)
• Front: 16 inches (402 mm)
A poorly ventilated machine can cause excessive
internal heat and fire.
Environmental Requirements
Ensure that the installation location meets the following
conditions:
• Do not place the printer in a hot, humid, dusty or
poorly ventilated environment. Prolonged exposure
to such adverse conditions can result in fire or
electric shock.
• Temperature range 50 – 89°F (10 – 32°C ).
• Humidity range 15 – 85% (no condensation).
• Humidity should be 70% or below at 89°F (32°C),
and temperature should be 82°F (28°C) or below at
85% humidity.
• Do not expose the printer to direct sunlight.
• Do not expose the printer to the direct draft of air-
conditioning or heating.
Install the Face Up (Rear)
Tray
1. Insert the right and left tabs of the face up (rear)
tray into the holes at the back of the printer (1),
and lower the tray into position (2).
2. Push up the rear output tray lever as shown in the
diagram (1) and pull out the extension tray (2).
Install the Drum-Toner
Cartridge
NOTE
Sudden temperature fluctuations can affect
print quality. Rapid heating of a cold room or
moving the printer from a location with low
humidity/temperature to high humidity/
temperature can cause condensation inside the
printer, directly interfering with image transfer.
When condensation occurs, leave the printer
for at least 1 hour to acclimate to the
environment before using it.
NOTE
Your printer is supplied with a drum-toner
cartridge with an approximate capacity of
10,000 Letter pages at 5% coverage.
Replacement drum-toner cartridges are
available with approximate capacities of
15,000 pages, 20,000 pages or 25,000 pages.

Oki B710dn Specifications

General

Wi-Fi	No
Network ready	Yes
Print technology	-
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Printer fonts	Barcode, PCL, PostScript
Maximum duty cycle	200000 pages per month
Recommended duty cycle	5000 pages per month
Page description languages	PCL 5e, PCL 6, SIDM
Flash memory	40 MB
Maximum internal memory	625 MB
Sound power level (standby)	30 dB
Sound pressure level (printing)	64 dB
Display	LCD
Total input capacity	150 sheets
Total output capacity	500 sheets
Maximum input capacity	1800 sheets
Paper tray 2 input capacity	550 sheets
Envelopes sizes	C5, DL
Maximum print size	216 x 297 mm
Media weight (tray 1)	64 - 216gsm
Paper tray media types	Plain paper
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Standard interfaces	Ethernet, Serial, USB 2.0
Power consumption (standby)	169 W
Power consumption (printing)	904 W
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	15 - 85 %
Power supply type	AC
Custom media sizes	76/215 - 127/1219 mm
Power requirements	AC 230V, 50/60Hz
Networking features	10/100 Base-TX
Authentication method	EAP-MD5, PEAP, EAP-TLS
Compatible operating systems	Microsoft Windows 2000/XP Home/XP Professional/Vista/7/Server 2003/Server 2008, Mac OS X 10.2 - 10.6
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1x
Non-operating relative humidity (non-condensing)	15 - 80 %
Bundled software	Template Manager, PrintSuperVision, OKI LPR, PDF Print Direct, Font & Macro Manager, Status Monitor

Weight and Dimensions

Dimensions (WxDxH)	422 x 572 x 404 mm