Oki Data CONFIDENTIAL
42615101TH Rev.8 223 /
(4) When ti does not see the Lever-sensor like the figure, turn the gear in the direction of the
arrow, and it tries to see the Lever-sensor.
Gear
(5) Return the tape to former position.
(6) Put the Toner-cartridge vertically.
(7) Move Lever-sensor like the figure.
Lever-sensor
(8) Confirms the Lever-sensor is returned smoothly.
Lever-sensor
(9) Repeate (7) and (8), 3 times. The Toner-cartridge is wrong when the Lever-sensor does
not work from the position of (7) or when it does not return smoothly.
To Next Page
Loading...
Need help?
General
