Troubleshooting> 129
5. Put the cartridge down gently onto a piece of paper to
prevent toner from marking your furniture and to avoid
damaging the green drum surface.
6. Repeat this removal procedure for each of the remaining
image drum units. Cover the image drum units to protect
them from direct light.
7. Look into the printer to check whether any sheets of paper
are visible on any part of the belt unit.
CAUTION!
The green image drum surface at the base of the
cartridge is very delicate and light sensitive. Do not
touch it and do not expose it to normal room light for
more than 5 minutes.
To Next Page
Loading...
Need help?
General
