Oki C712 User Manual

- 115 -
7. Fax
3
Press [Fax].
4
Press [Manual Dial].
5
Enter the destination number, and then press [OK].
6
Change settings if necessary.
• The default settings for sending a fax are as follows.
[Scan Size]: A4 or Letter
[Resolution]: Normal
[Density]: 0
• You can change the default settings by pressing [Device Settings] > [Admin Setup] on the touch panel.
Fax Setup (Advanced Manual)
• Enable [Preview] on the [Advanced] tab to preview the image to send.
7
Press the (START) button.
• Cancelling During a Transmission
• Cancelling a Reserved Transmission
Cancelling During a Transmission
You can cancel a fax transmission when a message is displayed and scanning is in progress.
1
Press the (STOP) button.
Cancelling a Reserved Transmission
If you select broadcast, the broadcast job is cancelled.
1
Press [Fax/Internet Fax] on the touch panel or the (FAX) button on the
operator panel.
2
Press [Fax].
3
Press the [Fax Job View/Cancel] tab.
4
Press [Delete] of a job to cancel.
Cancelling a Fax Transmission

Oki C712 Specifications

General

Printer Type	Color Laser Printer
Print Technology	LED
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	100, 000 pages
Memory	512 MB
Paper Capacity	up to 1, 690 sheets maximum
Connectivity	USB 2.0, Ethernet, Wi-Fi
Media Sizes Supported	A4, A5, A6, B5, Legal, Letter, Executive
Operating Systems Supported	Windows, Mac, Linux
Duplex Printing	Automatic