- 117 -
7. Fax
Setting for Receptions
This section describes various settings when receiving faxes.
• Setting the Reception Mode
• Setting a Tray to Print Received Documents
• Setting the Waiting Time from When an Incoming Call Arrives to When Reception Starts
(Response Waiting Time)
[Fax Ready Mode] is set by factory default.
Change the setting according to your environment.
• [Fax Ready Mode] : Select this mode if you use this machine for fax only.
• [Tel/Fax Ready Mode] : Select this mode if you want to receive both phone calls and faxes
with the machine detecting automatically.
• [Ans/Fax Ready Mode] : Select this mode if you want to use the answering phone function
of an external telephone as well as the fax function of the machine.
• [Tel Ready Mode] : Select this mode if you often use the external telephone that is
connected to the machine.
• [DRD] If you use the distinctive ring detection (DRD) function that is provided by a
telephone company.
1
Check that the machine is turned on.
2
Press [Device Settings] at the top of the home screen.
Setting the Reception Mode
To Next Page
Loading...
Need help?
General
