EasyManuals Logo

Oki C821 Maintenance Manual

Oki C821
253 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #164 background imageLoading...
Page #164 background image
44015503TH Rev. 1
163 /
Oki Data CONFIDENTIAL
7. TROUBLESHOOTING PROCEDURE
Panel display
(The mark indicates no
message in the upper row.)
ON
LINE
lamp
Inspec-
tion
lamp
Details
Remedial
measure
%COLOR% Image
drum is reaching near
life end.
Var
ies On
(Off)
Indicates that the image drum is
reaching near life end. Print can
be continued until the image drum
reaches end of life. When the menu
has been set as follows: ADMIN
MENU [S
YSTEM CONFIG MENU]
– [NEAR LIFE LED] = DISABLE, the
inspection LED is turned off.
%COLOR%
Yello
w
Magenta
Cyan
Black
Fuser is reaching
near
Life end.
Var
ies On
(Off)
Indicates that the fuser is reaching
near life end. If the menu has been
set as follows: ADMIN MENU
[S
YSTEM CONFIG MENU”]– “NEAR
LIFE LED = DISABLE”, the inspection
LED is turned off.
Belt is reaching near
Life end.
Var
ies On
(Off)
Indicates that the transfer belt is
reaching near life end. Because it is
warning only, print is not stopped. If
the menu has been set as follows:
ADMIN MENU [S
YSTEM CONFIG
MENU] – “NEAR LIFE LED =
DISABLE”, the inspection LED is
turned off.
Replace the fuser.
Var
ies On Indicates that the fuser had reaching
end of life (warning). It is warning
only. (Life end error is not issued.)
This status is displayed when the
cover is Opened/Closed after the
Fuser Life error has been issued.
Replace the
fuser with the
new fuser.
Panel display
(The mark indicates no
message in the upper row.)
ON
LINE
lamp
Inspec-
tion
lamp
Details
Remedial
measure
Replace the belt.
Var
ies On Indicates that the transfer belt has
reached end of life (warning).
Warning only. (Life end error is not
issued.)
This status is displayed when the
cover is Opened/Closed after the
transfer belt has reached end of life.
Replace the
belt unit with
the new belt
unit.
%COLOR% The
printer runs out of
toner.
Var
ies On Indicates that the printer runs out of
toner.
This status (warning) is issued when
the cover is Opened/Closed once
after the error is issued to recover the
printer once.
%COLOR%
Yello
w
Magenta
Cyan
Black
Replace the
toner cartridge
with the new
toner cartridge.
%COLOR% The
toner cartridge is not
installed in the printer.
Var
ies On Indicates that the toner cartridge is
not installed. This status is warning
only.
%COLOR%
Yellow
Magenta
Cyan
Black
Install the
toner cartridge.
Be careful
that the toner
cartridge
supplied with
the product
cannot be
used if the
toner cartridge
of other supply
is used.
%COLOR% Replace
the image drum.
Var
ies On Indicates that the image drum has
reached end of life.
This status (warning) is issued when
the cover is Opened/Closed once
after the Image Drum Life end error is
issued to recover the printer once.
%COLOR%
Yello
w
Magenta
Cyan
Black
Replace the
image drum of
the indicated
color.

Table of Contents

Other manuals for Oki C821

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki C821 and is the answer not in the manual?

Oki C821 Specifications

General IconGeneral
BrandOki
ModelC821
CategoryAll in One Printer
LanguageEnglish

Related product manuals