OkiLAN 8200e Network User’s Guide
100
Trap-9
Set up to five IP addresses to which a trap packet is sent. 0.0.0.0 to
255.255.255.255.
Default setting: 0.0.0.0
AdminManager
[Setup]
→ [OKI Device Setup] → [SNMP] → [Printer Trap
Setup …] → [TCP #!–5]
Web Browser
[Network]
→ [SNMP Trap] → [STEP2. Set Printer Trap
Address] → [Address 1 [2, 3, 4, 5]]
TELNET
[Setup printer trap]
→ [Setup TCP#1–5 trap] → [TCP#1–5 Trap
address]
Trap-10
Enable/disable sending a trap packet for each of the five destinations.
Default setting: Disable
AdminManager
[Setup]
→ [OKI Device Setup] → [SNMP] → [Printer Trap
Setup …]
→ [IPX] → [Detail …] → [Trap Enable]
Web Browser
[Network]
→ [SNMP Trap] → [STEP3. Set Printer Trap
Assignments]
TELNET
[Setup printer trap]
→ [Setup IPX trap] → [IPX Trap enable]
To Next Page
Loading...
Need help?
General
