OkiLAN 8200e Network User’s Guide
96
Trap
Trap-1
Sets community name assigned to outgoing printer status traps such
as off-line, paper out, etc. Up to 77 alphanumeric characters. Default
is public
.
Default setting: Public
AdminManager
[Setup]
→ [OKI Device Setup] → [SNMP] → [Printer Trap
Setup …]
→ [Printer Trap Community Name]
Web Browser
[Network]
→ [SNMP Trap] → [Printer Trap Settings] →
[ STEP1. Set Printer Trap Community Name} → [Printer Trap
Community Name]
TELNET
[Setup printer trap]
→ [Prn-Trap community]
Trap-2
Enable/disable sending a trap packet for each destination. Five IP
address destinations and one IPX destination can be set up.
Default setting: Disable
AdminManager
[Setup]
→ [OKI Device Setup] → [SNMP] → [Printer Trap
Setup …] → [TCP #1–5] → [Detail …] → [Trap Enable]
Web Browser
[Network]
→ [SNMP Trap] → [STEP3. Set Printer Trap
Assignments]
TELNET
[Setup printer trap]
→ [Setup TCP#1–5 trap] → [TCP#1–5 Trap
enable]
To Next Page
Loading...
Need help?
General
