OkiLAN 8200e Network User’s Guide
114
SMTP-19
Enable/disable sending an E-mail when a finisher error occurs.
Default setting: Disable
AdminManager
By EVENT: [Setup]
→ [OKI Device Setup] →
[E-mail(Send] → [Destination Address] → [1…–5…] →
[Notify Mode = EVENT] → [Event Mode] → [Printing Error =
ON or NoWait]
By PERIOD: [Setup] → [OKI Device Setup] →
[E-mail(Send] → [Destination Address] → [1…–5…] → [
Period Mode = PERIOD]
→ [Printing Error = ON]
Web Browser
Not applicable
TELNET
[Setup SMTP (E-mail)]
→ [Event to address 1–5] → [Finisher]
SMTP-20
Set up to four signature lines to be added to the bottom of an E-mail.
Up to 63 alphanumeric characters
Default setting: Null
AdminManager
[Setup]
→ [OKI Device Setup] → [E-mail(Send)] →
[Comment …]
Web Browser
[Network]
→ [Email] → [Send Settings] → [STEP3] →
[>>More] → [Configure attached information] → [Comment:]
TELNET
[Setup SMTP (E-mail)]
→ [Signature line 1–4]
To Next Page
Loading...
Need help?
General
