OkiLAN 8200e Network User’s Guide
171
b. In [Name of printer or print queue on that server] type lp.
9. Follow the on-screen instructions to finish the installation.
Port 9100
1. Click [Start] → [Settings] → [Control Panel].
2. Open the [Printers] folder.
3. Double-click [Add Printer].
4. Click [Next].
5. Click [Local Printer] and clear the [Automatically detect my printer]
check box.
6. Click [Next].
7. Click [Create a New Port] → [Standard TCP/IP Port].
8. Click [Next].
The “Welcome to the Add Standard TCP/IP Printer Port Wizard”
appears.
9. Click [Next] and enter [Printer name] or IP address, for example:
172.168.1.31. If the example IP address is entered, the Port Name
will default to IP_172.168.1.31.
10. Click [Next]. Additional port information will be required.
11. Under [Device Type], click [Custom] → [Settings].
12. Ensure [Protocol] is set to [Raw].
13. Ensure [Port Number] is 9100 and [SNMP Status Enabled] is
deselected.
14. Click [OK].
15. Follow the on-screen instructions to finish the installation.
IPP
1. Click [Start] → [Settings] → [Control Panel and Printers].
2. Open the [Printers Folder].
3. Double-click [Add Printer].
4. Click [Next].
5. Click [Network Printer].
6. Click [Next].
To Next Page
Loading...
Need help?
General
