To Next Page

To Previous Page

OkiLAN 8200e Network User’s Guide

185

Example

For IP address 172.168.20.127

# ping 172.168.20.127

If there is no reply, there is a problem with the configuration of the IP

address (the IP address has been already set manually or by the DHCP/

RARP server), or with the network. Reset the network interface card

settings to default and try to set temporary IP address.

If you still have the problem after resetting the network interface card,

consult the network manager.

4. Log in to the network interface card using TELNET.

Example

Logging in to IP address 172.168.20.127:

#telnet 172.168.20.127

Trying 172.168.20.127

Connected to 172.168.20.127

Escape character is ‘^]’.

EthernetBoard OkiLAN

‘root’ user needs password to login.

password: <CR>

User ‘root’ logged in.

No. Message Value (level .1)

1 : Setup TCP/ IP

2 : Setup SNMP

3 : Setup NetWare

4 : Setup EtherTalk

5 : Setup NetBEUI

6 : Setup printer port

7 : Display Status

8 : Setup printer trap

Oki C9600dn Network And Configuration Guide

Other manuals for Oki C9600dn