Security Features: IPP Encryption • 131
9. Scroll down and under the [Value] column enter the information
to be included in the certificate:
a. To change the Key Exchange method or the size of the
Public Key to be attached with the certificate, scroll down to
the bottom and click [Change these settings].
b. Select the desired method and key size, then click [OK].
10. When done, click [OK] to send the setting to the print server.
A Value List window appears.
11. Check the settings. If they are correct, click [OK]. If you need to
make changes, click [Cancel], make any needed changes and
click [OK] to send the revised information to the print server.
12. Click [OK].
The “Security Alert” window appears.
To Next Page
Loading...
