222
Printer Menu
Overview
The following tables summarise the Admin Setup, Calibration, Print
Statistics and BootMenu trees.
The remainder of the menus above are described in Appendix B of
the on-line printer User’s Guide.
Table Conventions Used
• The menu trees are given to the lowest menu item level. Typically,
this can be a parameter that can be set by selecting from a range
of values provided or a command that can be executed to display
or print a status or setting value.
• Emboldened values are the defaults.
• Certain menus and items associated with, for example, the
Finisher appear only if the associated hardware is installed or
under certain conditions, as specified.
To Next Page
Loading...
