Printing from Windows: Using TCP/IP Protocol • 161
4. Click [Apply].
5. Close the AdminManager utility.
Configuring Windows to Print to the
Network Printer
Configuring Windows for Printing
Windows XP
Windows XP requires administrator privileges.
With Windows XP, there are four options for printing using TCP/IP.
• Oki LPR
• Microsoft LPR*
• Port 9100
• IPP
* In order to use Microsoft LPR, it must first be installed on your
system.
Oki LPR
Please follow the procedure described under “Installing Oki LPR” on
page 120.
Microsoft LPR
1. Click [Start] → [Settings] → [Control Panel] → [Printers and
Other Hardware].
2. Click [Printers and Faxes].
3. Click [Add Printer], then click [Next].
4. Click [Local printer attached to this computer].
5. Clear the [Automatically detect and install my Plug and Play
printer] check box, then click [Next].
6. Click [Create a New Port] and [Type Standard TCP/IP Port].
To Next Page
Loading...
