Oki C9600n

Configuration: Configurable Items • 71
SNMP
SNMP-1
Community name used to check incoming SNMP requests.
Displayed as asterisks (***) for security reasons. Up to 15
alphanumeric characters. Default is public
.
SNMP-2
Community name assigned to outgoing system traps such as cold
start, authentication failure, etc. Up to 15 alphanumeric characters.
Default is public
.
NOTE
The default setting is underlined.
AdminManager
[Setup] → [OKI Device Setup] → [SNMP] → [Authentic Community]
Web Browser
Not available.
TELNET
[Setup SNMP] → [Authentic Community]
AdminManager
[Setup] → [OKI Device Setup] → [SNMP] → [TRAP Community]
Web Browser
[Network] → [SNMP Trap] → [STEP1] → [Printer Trap Community
Name]
TELNET
[Setup SNMP] → [Trap Community]