Printing from Windows: Using TCP/IP Protocol • 158
5. In the "Select Network Component Type" window, click
[Protocol] → [Add].
6. In the "Select Network Protocol" window, click [Internet Protocol
(TCP/IP)] → [OK].
7. Follow the on-screen instructions to finish the installation.
Installing TCP/IP Protocol
Windows 2000
1. Click [Start] → [Settings] → [Network and Dial-up Connections].
2. Double-click the [Local Area Connection] icon
3. In the "Local Area Connection Status" window, click
[Properties].
4. In the "Local Area Connection Properties" window, click
[Install].
5. In the "Select Network Component Type" window, click
[Protocol] → [Add].
6. In the "Select Network Protocol” window, click [TCP/IP
Protocol] → [OK].
7. Click [Close].
8. Click [Close].
Installing TCP/IP Protocol
Windows NT 4.0
1. Click [Start] → [Settings] → [Control Panel].
2. Double-click the [Network] icon.
3. In the” Network” window, click the [Protocols] tab.
NOTE
The Windows NT 4.0 installation CD-ROM may be
required to complete the installation.
To Next Page
Loading...
