Printing from Windows: Using TCP/IP Protocol • 166
Configuring Windows for Printing
Windows NT 4.0
NT 4.0 requires administrator privileges.
With Windows NT 4.0, you have two options for printing using TCP/
IP. They are:
• Oki LPR
• Microsoft LPR
Oki LPR
Please follow the procedure described under “Installing Oki LPR” on
page 120.
Microsoft LPR
1. Click [Start] → [Settings] → [Control Panel] → [Printers].
2. Click [Add Printer].
3. Click [My Computer] → [Next].
4. Click [Add Port].
5. Click [LPR Port] → [OK].
6. In [Name or address of server providing lpd], type the host
name or IP address of the host for the printer you are adding.
7. In [Name of printer or print queue on that server], type the
logical printer name "lp" and then click [OK].
8. Follow the on-screen instructions to finish the installation.
NOTE
In order to use Microsoft LPR, it must first be installed
on your system.
To Next Page
Loading...
