Oki C9600n

Configuration: Configurable Items • 77
NetWare-7
Set the print job polling interval for Print Server. Range 2 to 255
seconds. Default is 4 seconds
.
NetWare-8
Enable/Disable Bindery mode. Change to Disable if you use the print
server as PSERVER on NDS.
AdminManager
[Setup] → [OKI Device Setup] → [NetWare] → [Bindery
Setup] → [Job Polling Time]
Web Browser
[Network] → [NetWare] → [To STEP2] → [STEP4. Bindery Mode
Settings] → [Job Polling Rate]
TELNET
[Setup NetWare] → [Setup PSERVER mode] → [Job Polling Interval]
AdminManager
[Setup] → [OKI Device Setup] → [NetWare] → [Check box beside
Bindery Setup]
Web Browser
[Network] → [NetWare] → [STEP1 Select NetWare Mode] → [Print
Mode = Print Server: NDS/Bindery]
TELNET
[Setup NetWare] → [Setup PSERVER mode] → [Bindery mode]