Configuration: Configurable Items • 94
Trap-9
Set up to five IP addresses to which a trap packet is sent. 0.0.0.0 to
255.255.255.255.
Trap-10
Enable/disable sending a trap packet for each of the five
destinations.
AdminManager
[Setup] → [OKI Device Setup] → [SNMP] → [Printer Trap Setup
…] → [TCP #!–5]
Web Browser
[Network] → [SNMP Trap] → [STEP2. Set Printer Trap
Address] → [Address 1 [2, 3, 4, 5]]
TELNET
[Setup printer trap] → [Setup TCP#1–5 trap] → [TCP#1–5 Trap address]
AdminManager
[Setup] → [OKI Device Setup] → [SNMP] → [Printer Trap Setup
…] → [IPX] → [Detail …] → [Trap Enable]
Web Browser
[Network] → [SNMP Trap] → [STEP3. Set Printer Trap Assignments]
TELNET
[Setup printer trap] → [Setup IPX trap] → [IPX Trap enable]
To Next Page
Loading...
