Using adminmanager standard setup > 27
TCP/IP Tab (Oki Device Setup)
ITEM COMMENTS
Use TCP/IP Protocol Enable/disable TCP/IP protocol.
Use DHCP/BOOTP Click to select this item if the IP address, subnet
mask, default gateway and IP addresses for DNS
primary server and secondary servers are
retrieved from the DHCP or BOOTP server.
Use IPv6 Use to enable/disable IPv6.
Use Windows Rally Windows Vista only: Use to discover and
configure devices over a network.
IP Address Set the IP address of the selected network
interface card.
Subnet Mask Set the subnet mask of the selected network
interface card.
Default Gateway Set the default gateway of the selected network
interface card.
Auto Discovery… Use to enable/disable Network PnP and Bonjour,
and to set the Device Name.
DNS Server… Set IP addresses for DNS primary and secondary
servers.
WINS Server… Use to set IP addresses for primary and secondary
servers, and to enter a Scope ID.
To Next Page
Loading...
