Oki C9650n

Using adminmanager standard setup > 36
SNTP Tab (Oki Device Setup)
Domain Filter… Set the following:
Use Domain
Filter
Enable/disable domain filtering.
Filter Policy Select ACCEPT (the default) or DENY.
Domain Filter Define up to five domain filters.
ITEM COMMENTS
ITEM COMMENTS
Use SNTP Enable/disable SNTP (Simple Network Time Protocol).
NTP Server 1
Address
Set the IP address or host name for NTP Server 1.
NTP Server 2
Address
Set the IP address or host name for NTP Server 2.
Adjust Interval Set the interval for sending time update requests to the
server. Select 1 hour (the default), 12 hours or 24 hours.
Local Time Zone Set the local time zone from -12:00 to +13:00. Minute
interval is selectable from 00 (the default), 15, 30 or 45.
Daylight Saving When this is selected, one hour is added to the local
time.