Oki C9800hdn Printing Guide

8
8-5 Printing using an E-mail Client
Printing using the E-mail Port Monitor
Once you set up the E-mail Port Monitor, you can print using E-mail Service in the
same manner as any other printing method. No additional steps are necessary.
NOTE: The E-mail Port Monitor is only supported on Windows computers. Also,
Direct connection is not supported when printing with E-mail Port Monitor.
TO PRINT USING THE FIERY E-MAIL PORT MONITOR
1. Choose Print in your application.
2. Make sure the Fiery is selected as your printer and you have set up the E-mail Port
Monitor for the Fiery.
3. Click Properties.
4. Click the Fiery Printing tab.
5. Set the print options and click OK.
To set options using the printer driver, see “Setting options and printing from
Windows computers” on page 1-1.
6. Click OK again to send your job to the Fiery.
N
OTE: If the attachment exceeds the file size limitation set in your application, the
attachment may be broken into several messages.

Oki C9800hdn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	110 sec
resolution	1200 x 1200 dpi
processor	1 GHz
duty cycle	150, 000 pages/month

Memory

standard ram	1, 024 MB
flash memory	4 MB
hard disk drive	20 GB

Paper Handling

standard input	760 sheets
optional input	2nd/3rd universal tray (530 sheets each)
maximum capacity	2, 880 sheets
paper sizes supported	up to 12.9" by 47.24"
paper weight trays 1-5	17 lb.–57.5 lb. bond
duplex printing	standard on C9800hdn

Power and Acoustic Noise

power consumption typical	750W
power consumption peak	1500W
power consumption idle	200W
acoustic noise operating	54dB(A)

Weight and Dimensions

size	25.8" x 24.4" x 18.2"
weight	152 lb.