3
3-1 Printing to the Fiery
You can print to the Fiery directly from UNIX workstations. Jobs printed to the Fiery
are sent to the Print or Hold queue and can be manipulated from Command
WorkStation/Command WorkStation LE or from Windows and Mac OS computers
on the network using Fiery Spooler.
NOTE: If you print to the Hold queue, an operator must intervene from the job
management tools for the job to print; jobs sent to the Hold queue are spooled to disk
and held.
For more information on using the job management tools, see the
Job Management Guide.
The queue name and Fiery printer name are determined by your system administrator.
Contact your system administrator for the names of your queues.
For information about setting up printing from TCP/IP, see your UNIX system
documentation.
Printing to the Fiery
You can use UNIX commands to print PostScript and text files to the Fiery.
In general, use basic print commands (lpr, lpq, lprm) to send print jobs to the Fiery.
For information about UNIX commands, see the UNIX manual pages or other
documentation.
TO PRINT FROM UNIX
• On a system running Solaris 8, use the lp command to send a job to the Fiery, as
follows:
lp -d <printername> -n <copies> <filename>
For example, if the Print queue of your Fiery is named print_Server, your file is named
Sample, and you want to print two copies, type:
lp -d print_Server -n 2 Sample
Chapter 3:
Printing
from UNIX
Workstations
To Next Page
Loading...
Need help?
Performance
Memory
Paper Handling
Power and Acoustic Noise
Weight and Dimensions
