Oki C9800hdn

A
A-11 Print Options
Scale
25-400%
100%
Specify a scaling override for your
print job.
This option is available only as an
override from
the job management tools.
For more information, see page A-18.
N
OTE: The supported range is 25 to
400.
NOTE: This option is not the same as
the Scale option available from the
printer driver.
Screen Selection
Dot Screen/Line Screen (Auto)/
Line Screen (Detail)/
Line Screen (Smooth)
Sort Mode
Off
/Collate
Specify how to output
multiple-page/multiple-copy jobs.
Spot Color Matching
Printer’s default
/Off/On
Select Off to print specified PANTONE
colors in your job using the current
CMYK Simulation and CMYK
Simulation Method.
Select On to activate the PANTONE
Lookup Table. The C9800 prints
specified PANTONE colors in your job
by matching the CMYK print blend to
the same color from the PANTONE
library.
The Printer’s default setting reflects the
setting specified in Fiery Setup.
For Windows, choose Expert Color as
the Color Mode to access this option.
For more information, see Chapter 1 of
the Color Guide.
Stapler Mode
Off
/Top Left Horizontal (one)/
Top Left Vertical (one)/
Top Right Horizontal (one)/
Top Right Vertical (one)/
Left (two)/Right (two)/Top (two)/
Saddle Stitch
Specify how to staple
multiple-page/multiple-copy jobs.
Toner Saving
On/Off
Select On if you want to conserve the
amount of toner used when printing
a job.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information