Oki CX2731MFP - Page 28

28 - English
Using Ethertalk
Mac 10.5 (Leopard)
1 Make sure that your machine and the Mac are
turned on and connected.
2 Insert the DVD supplied with your machine
into the computer.
3 Double-click the icon that appears on the
desktop.
4 Double-click the [Driver] folder, then the
[Printer] folder.
5 Double-click [Installer for MacOSX].
6 Enter the administrator’s name and password,
and then click [OK].
7 Follow the instructions displayed on the
screen to complete the installation.
8 Remove the DVD from the computer.
9 From the Apple menu, select [System
Preferences].
10 Click [Print & Fax].
11 Click [+].
12 Click [AppleTalk].
13 Select the name of your machine and then
check that the name of your machine is
displayed in [Print Using].
14 Click [Add].
15 If the [Installable Options] window appears,
click [Continue] unless you have already
installed options. If you have installed
options, configure each option before clicking
[Continue].
16 Check that your machine is displayed under
[Printers].
17 Check that the name of your machine is
displayed in [Kind] and then close [Print &
Fax].
The installation is complete.
Note
The name of your machine may not be displayed
if the printer driver does not read the PPD file
correctly.
In this case, click [-] to remove your machine
from [Print & Fax] and then redo the procedure
from step 10.
Using Bonjour (Rendezvous)
Mac 10.3.9 to 10.4.11
Note
The procedure below uses Mac OS X 10.4.11 as
an example. The actual procedure may differ
somewhat depending on the operating system.
1 Make sure that your machine and the Mac are
turned on and connected.
2 From the Apple menu, select [System
Preferences].