EasyManuals Logo

Oki ES7170dn MFP User's Manual And Troubleshooting Guide

Oki ES7170dn MFP
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
2
1
3
4
5
6
7
TROUBLESHOOTING FOR PRINTING
- 23 -
Cannot remember the document password for a Private Print job
Problem Description
I cannot remember the document password for my Private Print job.
Corrective Action
The document password for a Private Print job is never shown, once the job has been sent to the equipment.
To print the failed Private Print job, submit the document again as a new Private Print job.
The failed Private Print job remains unprinted in the job queue. To delete it, either way below is required. Contact the administrator of
the equipment.
Enter the administrator’s password in the Private Print job list on the touch panel and delete the job.
For details, refer to the Advanced Guide.
Log in to TopAccess with the administrator’s password and delete the job in the Print Job list.
For details, refer to the TopAccess Guide.
Printing a document including many graphics takes time
Problem Description
It takes time to print a document including many graphics from a PCL driver.
Corrective Action
Since this may happen occasionally, clear the [JPEG Compression] check box of the [PDL Settings] tab in [Customization] of the
[Device Settings] tab before printing such documents.
Printer Driver Problems
This section describes the troubleshooting for the printer drivers.
Cannot print (port setting problems)
Problem Description
I cannot perform printing with the equipment.
Corrective Action
If the printer driver on the client computer points to a wrong network port, jobs neither appear in the current jobs queue nor are
printed. Fix the problem following the procedure below:
1. Select [Start] - [Devices and Printers].
2. Right-click the printer driver icon.
3. Select [Printer Properties] from the shortcut menu.
4. Select the [Ports] tab.
5. Make sure that the path to the machine and the device name are correct.
\\<device name>\print
<device name> is the same as the device name set from the touch panel. “print” may be “univ” or “ps3” depending on the printer
driver you use.
6. Click the [General] Tab and click [Print Test Page] to confirm that the settings are correct.
Cannot print (SNMP Community Name problems)
Problem Description
I cannot perform printing with the equipment.
Corrective Action
Check if the SNMP community names are the same in the following 3 settings.
Equipment
TCP/IP port of the [Ports] tab in the printer driver
[SNMP Settings] dialog box of the [Others] tab in the printer driver

Table of Contents

Other manuals for Oki ES7170dn MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki ES7170dn MFP and is the answer not in the manual?

Oki ES7170dn MFP Specifications

General IconGeneral
BrandOki
ModelES7170dn MFP
CategoryAll in One Printer
LanguageEnglish

Related product manuals