Replacing Consumables / Maintenance Units
- 57 -
Replace the Print Cartridge
1
Insert your finger into the recess on the
right side of the printer and pull the front
cover open lever to open the front cover
forward.
Memo
• Open the front cover gently. If you open it rapidly, the
MP Tray may open.
2
Remove the print cartridge.
Note
• When toner powder adheres to the paper feeding area
inside the printer, wipe it off with a wet cloth that has
been well wrung.
3
Take out the new print cartridge from its
bag and remove the desiccant attached to
it.
4
Place a new print cartridge into the printer.
5
Turn the blue lever of the print cartridge
fully in the direction of the arrow while
pressing the top of the print cartridge.
6
Close the front cover.
Note
• The front cover cannot be closed completely if the top
cover is not closed.
7
Please recycle used print cartridges.
Memo
• If you must dispose of a toner cartridge, put it in a
plastic bag or similar container and dispose of it in
accordance with your municipality's ordinances or
guidelines.
Front cover
Front cover
open lever
Print cartridge
Blue lever
To Next Page
Loading...
Need help?
General
