To Next Page

To Previous Page

SETTING ITEMS (ADMIN)

- 279 -

Specify the following items and press

[NEXT].

• TRANSMIT POWER

Select the low transmit power if you want to limit the area

that the wireless communication is enabled. If you do not

have to limit the area, select [100%].

Confirm the settings and press [FINISH].

Memo

• If you want to change the settings, press [PREV] to

move back to the screen that you want to change and

then repeat the operation.

Press [YES], and wait until the setting is

reflected.

Selecting no security mode

You can also set no security for wireless access.

Note

• If you do not set no security, anyone knows how the SSID

can connect to the wireless network. Therefore, it is

recommended to set the security if it is possible.

Press [NONE] and press [NEXT].

The TRANSMIT POWER SETTINGS screen is displayed.