- 204 -
6. Maintenance
2
Slightly lifting the MP tray (a), press the right arm (b) inward, then unlock the
tab (c).
3
In the same manner, slightly lifting the MP tray, press the left arm inward, then
unlock the tab.
4
Open the paper set cover (d) until it touches to the machine body.
5
Wipe the two feeding rollers with a wet cloth that has been wrung out well.
6
Close the paper set cover (d).
7
While pressing the right arm (b) on the MP tray (a) inward, slightly lift the MP
tray (a) and hook the tab (c).
Closing the MP tray without putting the tab back in place may crack the paper set cover. Be sure to put it back in
place.
To Next Page
Loading...
Need help?
General
