- 418 -
11. Utility Software
If you use the Speed Dial Manager, you can register and edit a destination speed dial.
You can register up to 1000 destinations to speed dial.
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine from [Registered Device Table].
3
Select the [User Setting] tab.
4
Click [Speed Dial Manager].
5
Enter the administrator password, and then click [OK].
The factory default password is "999999".
6
Click (New(Speed Dial)).
Registering a Fax Number (Configuration Tool)
To Next Page
Loading...
Need help?
General
