Oki Microline 8480FB - Page 37

Microline 8480FB User’s Guide
Function Setting Menu • 37
Manual Feed (cont.) Align1 Pos.Adj.
(Align 1 must be
selected)
0 mm, 5.1 mm , 45.4 mm
Adjusts in 1/90 inch (0.28 mm)
increments from initial setting
Align2 Pos.Adj.
(Align 2 must be
selected)
0 mm,
5.1 mm , 45.4 mm
Adjusts in 1/90 inch (0.28 mm)
increments from initial setting
Align3 Pos.Adj.
(Align 3 must be
selected)
0 mm,
5.1 mm , 45.4 mm
Adjusts in 1/90 inch (0.28 mm)
increments from initial setting
Align4 Pos.Adj.
(Align 4 must be
selected)
0 mm,
5.1 mm , 45.4 mm
Adjusts in 1/90 inch (0.28 mm)
increments from initial setting
AutoAlignDetect Valid Level 1,
Valid Level 2 ,
Invalid
Skew Detect Valid Level 1,
Valid Level 2 ,
Invalid
Set Alarm
Valid, Invalid
CSF Front Not Used.
CSF Rear Not Used.
Group Item Settings