ML1120 Plus/ML1190 Plus User’s Guide - Operating instructions > 66
printer speed settings
printer iMpact MOde
When switched ON, the printer enters the impact mode selected in
the menu. You can change this to normal speed, high speed and quiet
printing without using the menus as follows.
(This function is enable for ML1120 Plus.)
nOrMal speed printing
Use this for standard file printing operations.
1. Ensure the SEL indicator is illuminated.
2. Hold down the SEL button and press the TEAR button.
Status Indicator 1 turns off and Status Indicator 2 is illuminated.
HigH speed printing
Use this for high speed printing.
1. Ensure the SEL indicator is illuminated.
2. Hold down the SEL button and press the TEAR button.
Status Indicator 1 is illuminated and Status Indicator 2 turns off.
(High speed printing is applied only to the print of NLQ.)
Quiet printing
Use this for quieter printing.
1. Ensure the SEL indicator is illuminated.
2. Hold down the SEL button and press the TEAR button.
Status Indicator 1 and Status Indicator 2 are illuminated.