Oki ML1120 Plus - ML1190 Plus

ML1120 Plus/ML1190 Plus User’s Guide - Consumables and accessories > 85
ML1190 Plus
Item SpecIfIcatIon
Product Name ML1190 Plus
Model No.
D22410B
Print method Impact dot matrix
Print head 24 pins, 0.2 mm (0.0079 in) diameter
Print direction Bi-directional, short-line-seeking printing
Print speed
High Speed Draft (HSD)
Letter Quality (LQ)
Utility
333 cps @ 10 cpi
83 cps @ 10 cpi
250 cps @ 10 cpi
Line Feed (LF) time Approximately 47 ms per line for LF of 4.23 mm (1/6
in)
Form Feed (FF) speed Approximately 109.2 mm/s (4.3 in/s)
Paper feed control Paper feed: yes
Vertical tab: yes
Direct line feed: yes
Duplication capability Continuous forms: the original page +4 more pages
(total maximum paper thickness less than 0.325 mm)
Cut sheet: the original page +4 more pages (total
maximum paper thickness less than 0.325 mm)
Feeding direction Feed forward
Feed backward
Feeding mode Friction feed mode (top)
Pin tractor feed mode (rear)
Continuous forms tape tail
detection method
Detected when remaining paper is approximately 46
mm long. It can, however, print till about 6 mm from
the paper bottom (measured at the centre of the
characters).
(The print accuracy of the last page cannot be
guaranteed.)
Character sets Standard ASCII
Epson (Italics/Graphics)
IBM (Set1/Set2)
ML
Foreign
Code Page
Media See "Setting the Paper Thickness lever" on page 41.
Original OKI cartridge ribbon
Ink color
Ribbon life
Black
4 million characters (Utility mode)
Print head life 200 million characters (Utility mode)