40496501TH Rev.1 133
3 The printer cannot normally complete the initialization.
Printer status and Message on the LCD:
Although the access cover is close, the printer is in cover open state. : to C
Alarm lamp flashes Message on the LCD “ERROR, FUSE” : to D
Alarm lamp flashes Message on the LCD “ERROR, FLASH UNLOAD” : to E
Alarm lamp flashes Message on the LCD “ERROR, HOMING” : to F
Alarm lamp flashes Message on the LCD “ERROR, CENTERING” : to F
Alarm lamp flashes Message on the LCD “ERROR, SPACING” : to F
Alarm lamp flashes Message on the LCD “ERROR, AUTOGAP” : to G
Alarm lamp flashes Message on the LCD “ERROR, BEIL” : to H
Alarm lamp flashes Message on the LCD “ERROR, CHANGE” : to I
Alarm lamp flashes Message on the LCD “ERROR, OKI HSP CONNECT” : to J
Alarm lamp flashes Message on the LCD “ERROR, OPT CARD CONNECT” : to K
Alarm lamp flashes Message on the LCD “ERROR, HEAD THERMISTOR” : to L
Alarm lamp flashes Message on the LCD “ERROR, HEAD 1 FAN” : to M
Alarm lamp flashes Message on the LCD “ERROR, HEAD 2 FAN” : to N
Alarm lamp flashes Message on the LCD “ERROR, POWER FAN” : to M
Alarm lamp flashes Message on the LCD “ERROR, SPACE FAN” : to M
Alarm lamp flashes Message on the LCD “ERROR, INVALID IPT” : to O
To Next Page
Loading...
