Oki PACEMARK 4410 - Ribbon Feed Assy

40496501TH Rev.1 71
3.3.17 Ribbon Feed Assy
(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unplug the connector 1 from Junction Board (PRA Printed Board)(CN9) 7.
(3) Unscrew 2 screws 2 and remove Ribbon Feed Assy 3.
(4) Release the cord wrapping tie 4 and unscrew 2 screws 5, then remove the motor 6.
(5) For installation, reverse the removal procedure.
1
7
2
3
5
6
4
CN9