40496501TH Rev.1 97
Sliding Surface between Bail Life
Lever and Shaft(at left and right)
GEP- A (2 points at upper and lower)
Gear Teeth Surfasce
GEP- A
Gear Teeth Surfasce
GEP- A
Shaft
PM- B (2 points at left and right)
Bail Lift Lever Rack
GEP- A (at left and right)
Sliding Surface between Feed Shaft Bearing
and Side Frame (at upper and lower)
GEP- A (2 points at upper and lower)
Shaft
PM- B (2 points at upper and lower)
Adjusting Cam Surface
GEP- A
Right Side View
To Next Page
Loading...
