Oki PACEMARK 4410 - 3.3.2 Printer Unit

40496501TH Rev.1 55
3.3.1 Cover-Assy-Access / Cover-Assy-Side (R) / Cover-Assy-Side (L) /Cover-Assy-Front / Frame-
Assy-Rear / Plate-Front (stuck)
(1) Remove Guide Sheet 1 and Cover Assy Access 2.
(2) Unscrew 2 screws 3 and the screw 4 and the screw 5, then remove Cover Assy Side (R)
6, sliding it to the arrow direction.
(3) Unscrew 2 screws 7 and the screw 8 and the screw 9, then remove Cover Assy Side (L)
0, sliding it to the arrow direction.
(4) Unscrew 4 screws A and the screw B.
(5) Release Hooks C then remove Cover Assy Front D and Door Assy Front E.
(6) Unscrew 4 screws F then lift and remove Frame Assy Rear G.
(7) Unscrew the screw H then remove Guide Paper (B) I.
(8) Unscrew 6 screws J then lift and remove Plate Front (stuck) K.
(9) Unscrew 4 screws L then remove Cover Rear B M and Plate Earth (Cover Rear) N together.
(10) Unscrew 2 screws O then remove Cover Blank (lower) P.
(11) For installation, reverse the removal procedure.
G
F
F
F
J
B
A
C
J
I
N
6
9
P
O
M
H
1
2
3
5
6
D
K
4
J
J
7
0
B
E
J
F
L
L