40496501TH Rev.1 72
3.3.18 Printing Head
(1) Lean Frame Assy Rear backward and open Access Cover.
(2) Move the printing head to the recess on the right seen from the front.
(3) Pull out Ribbon Guide 1 upward.
(4) Unscrew 2 screws 2 and remove Printing Head 3 from the connector.
(5) For installation, reverse the removal procedure.
(Note on Installation)
1. The head should be installed according to Section 9, Procedure for Installing Print Head in
4 ADJUSTMENTS.
1
2
3
To Next Page
Loading...
