Oki Teriostar LP-1040-MF - Page 100

100
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
System Menu
y
Port
Enabled when On by Port is selected in operation TRAP ** job. The setting can also
be enabled. After printing is completed, a trap is sent to the TRAP Agent Computer
for all jobs sent to the Printer port that is specied here.
<Parameter by selecting options>
n
: Default value
n
All
Port 01 to 10
z
ActiveDirectory Settings (option)
y
DC Addresses 1 to 3
Specifies the DC (Domain Controller) address (IPv4/IPv6) when Active Directory
(option) is used.
<Parameter by entering characters>
Up to 255 characters
y
DC Access Login Name
Species the DC (Domain Controller) login name.
<Parameter by entering characters>
Up to 63 characters
z
Users with Active Directory access rights do not need to have domain administrator
privileges.
y
DC Access Password
Species the DC (Domain Controller) password.
<Parameter by entering characters>
Up to 63 characters
z
Users with Active Directory access rights do not need to have domain administrator
privileges.
y
Account Verication
Species whether or not the user logs in Active Directory.
In principle, this setting should not be changed.
<Parameter by selecting options>
n
: Default value
n
Logged In Logs in Active Directory.
Not Logged In Does not log in Active Directory.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6