114
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
Ports Settings Menu
<Parameter by selecting options>
n
: Default value
O Connection Timeout is not enabled.
5 minutes Sets 5 minutes.
10 minutes Sets 10 minutes.
15 minutes Sets 15 minutes.
n
30 minutes Sets 30 minutes.
n
LPD Disconnection
Sets the LPD disconnection process.
In principle, this setting should not be changed.
<Parameter by selecting options>
n
: Default value
n
With Terminating Packet Waits for the terminating packet from the host.
After Receiving All Data Does not wait for the terminating packet from the host.
Port 1 to 10
n
Protocol selection
Select used Internet ports and protocols.
Up to 10 ports can be selected.
<Parameter by selecting options>
n
: Default value
n
O Not set
FTP FTP Protocol
LPD LPD Protocol
XPT XPT Protocol
n
HPGL
<Parameter by selecting options>
n
: Default value
O The port does not accept HP-GL format command.
n
On The port accepts HP-GL format command.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6
To Next Page
Loading...
